Intelligent Crushing Equipment

Product Specifications

CPW Intelligent High-efficiency Single-stage Hammer Crusher

CPW Intelligent High-efficiency Single-stage Hammer Crusher are the advanced models available whose design principle is crushing materials by means of impact energy. Each gyrating cycle is formed by V-belt driving rotor through electronic and materials are crushed by high speed impact of flat hammer on gyrating rotor. After that, the materials are crushed again by throwing impact liner and then crushed again from impact plate to flat hammer. This process works again and again until materials are crushed to qualified size. Materials will keep going back and forth between the first and second crusher chamber untill the crushed ore size is less than the gap between flat hammer and blow bar. then, they will discharge through the setting below the machine as final the product. CPF series impact crushers can crush ore, limestone, slag, coke, coal etc which size are under 500mm, compressive strength less than 300MPa and are not fit for crushing ore of apparent moisture above 8% or sticky material. CPF series impact crushers have high reduction ratio, efficiency crushing and easy maintenance. The cubic type products are ideal for aggregate of highway and water and electricity construction. CPF series impact crushers are better fit for granite, limestone and cobble.

---

CPW Intelligent High-efficiency Single-stage Hammer Crusher are appropriate for

Crushing various material of medium hard and above, uniform products size, less flat-elongated products, ideal for aggregate of highway and water and electricity construction.(note: caution on material with high corrosivity)

---

Intelligent Functions

a.Real time monitoring on the abrasion of liner plates inside the discharge opening is executed, so that a reminder for replacement can be released in time.b.The size of the discharge opening can be automatically detected to ensure the stability of product size.
c.Intelligent Control on Feeding Quantity
d.Real time monitoring on the bearing temperature, which helps to discover abnormal conditions in time and execute timely maintenance, so that the service life of the bearings can be prolonged in a result.
e.Real time monitoring on the equipment vibration is executed, so that the equipment can be shut down automatically with warning messages under circumstances like hammer fracture, impact plate fracture or loose anchor bolts etc.
f.Real time monitoring on main shaft speed is executed, so that the equipment can be stopped automatically with warning messages launched when there is belt sliding or motor fault.
g.The hammers are flexible to retract, which can keep continuous impact force on over size materials and improve crushing efficiency.
h.The rack can be opened hydraulically, which can facilitate maintenance and replacement of the wearing parts greatly.
i.The equipment has networking function.

---

 

Product Inquiry

Product Name:
Full name:
Phone:
E-Mail:	*
Content:	*
Verification code:	Can't see, change one*